缆接到螺钉端子上。 由于WM1模块是对称回
In this manner, the end of the cable is
directly connected to a mechanical spread
Terminal switches from the electric TURCK
WAK4-5-WAS4/P00,TURCK旋转编码器

WAK4-5-WAS4/P00,TURCK旋转编码器
这种方式中，散开的电缆末端直接连接到机械
开关的端子上，来自TURCK信号处理器的电
signal processor
Cable connected to the screw terminals.
 Because the module is symmetrical back WM1
Road, all at the input side and the output
side is no different.
WM1 internal circuit composed of only a
few resistors, and these
Resistance in accordance with EN 60070-14 (DIN VDE 0165-1)
No authentication standard classification

WAK4-5-WAS4/P00,TURCK旋转编码器
of simple electrical equipment. therefore
■ When the input circuit monitoring func
tion effectively, need to contact the
Then the shunt resistor module
■ screw terminals to 2.5mm
路，所有安装在输入侧和输出侧没有区别。
WM1的内部电路仅由一些电阻构成，而且这些
电阻是按照EN 60070-14（DIN VDE 0165-1）
标准分类的不需要认证的简单电器设备。 因此
■ 当输入回路监控功能有效时，需在触点上

WAK4-5-WAS4/P00,